|
MATERIAL
HANDLING
1. Stack materials so it will not
slide, roll, fall or collapse. Do not pile material too high. Use
wooden strips or cardboard sheets between layer of objects which
might have a tendency to slide.
2. Always allow good access to stored
materials. Do not overflow floors.
3. Store flammable materials apart from
other materials.
4. Never store excess amounts of
materials on scaffolds or platforms.
5. Remove all projecting nails from
lumber before stacking or bend over before discarding.
6. Always block cylinder shaped
materials to prevent rolling.
7. Wire rope is never secured by knots
tied in the rope.
8. Wire rope will be spliced only in
accordance with applicable OSHA safety regulations and accepted
industry standards.
9. Install all cable clamps (clips)
with the "U" bolt on the dead or short end of the cable. Never
alternate clamps and use a minimum of three clips in all
cases. |