|
HAND AND POWER
TOOLS
1. Inspect all tools before using. Do
not use defective tools.
2. Use tools only for their designed
application.
3. Do not use tools with mushroomed
heads, sloppy connections, split or broken handles, or that have
other defects.
4. Make sure electrical tools are
grounded, are double insulated, or have an operable ground fault
interrupter in the circuit.
5. Disconnect tools and machines from
their power source before making adjustments or attachment
changes.
6. All air powered tools must have
safety clips or retainers on all connectors.
7. "Powder Actuated" tools are to be
used ONLY by trained, certified employees.
8. When using woodworking machines or
saws use guards or push sticks when possible. The employee shoudl
not place their fingers closer than 3 inches to any rotating
blade.
9. Do not remove guards or safety
devices, or use power tools which have such devices defective or
missing.
10. Inspect abrasive wheels for cracks,
chips or other defects before mounting.
11. Employees should not use any power
tool that they have not been checked out on, or are not qualified to
use. |