|
GENERAL SAFETY RULES (page
2)
11. Do not, under any circumstances,
play with an air hose. Do not blow dust or material toward any
person. Never put the nozzle against any part of another person's
body. Compressed air can quickly enter the body and cause death. Do
not blow off floors with the air hose. Do not operate air hose
without 30 p.s.i. nozzle.
12. You must not wear gloves while
operating a machine, tool or shile working close to moving machinery
such as conveyors, belts, etc., unless specified for hand
protection.
13. Ear protectors and face shields
must be worn by employees in all areas covered by provisions of the
Federal Occupational Safety and Health Law, and those designated as
hearing protection areas by Master Pumps & Equipment
Corporation.
14. Unsafe piling or overloading flats,
pallets, tubs or trailers is a violation of safety
rules.
15. Do not leave machines or vehicles
unattended while they are running.
16. Employees must not walk or climb
over barricaded areas, go by another route. Passageways, ramps and
stairways should not be used for storage areas and should be kept
clear at all times. Work areas, exists and aisle spaces should also
not be used for storage areas and should be kept clear at all times.
Specific storage areas should be established and all materials
should be stored using proper and safe storage methods.
17. Do not use mushroomed tools,
hammers, chisels, etc. Keep the mushroomed edges of the head ground
off.
18. Never use pneumatic chisels or
drills for hand chipping with a hand hammer. The shanks of pneumatic
chisels are very hard and there is danger of the shanks shattering
when struck with a hammer. Always use handles on files.
19. Worn or frayed carpet, open seams
and curled edges should not be permitted. There should be no loose
floor tiles or mats.
20. Chemical resistant clothing should be used for corrosive materials including gloves for the hands. |